Jeep Wrangler Forum banner

1 - 6 of 6 Posts

4 Posts
Discussion Starter #1 (Edited)
I'm a long time lurker and wanted to give you guys a heads up that my Rubi is for sale.

She is decked out with pretty much every upgrade that one would need to do some serious off roading. Sadly, my work schedule prevented me from getting to do anything other than some light trail riding and I never got to experience the full benefits of the upgrades.

The Jeep has the bulletproof 4.0 Liter I6 and is in great mechanical condition with a clean Carfax/AutoCheck. Cosmetically, it has only a few light trail scratches in the clear coat.

The only reason I am selling it is that I can't find the time to enjoy it, so I might as well give someone else the opportunity to have some fun with it.

Year: 2005
Model: Rubicon
Miles: 28,000
Transmission: 6 speed Manual
Engine: 4.0 Liter I6
Location: Monterey, CA

List of upgrades:
-Optima Red Top Battery
-Power Aid Throttle Body Spacer
-Airaid Cold Air Intake (the stock intake is also included)

Suspension and Steering:
-Rough Country 6 inch Long Arm Kit
-PSC Hydraulic Ram Assist Steering
-FOX steering stabilizer
-RockLoc Front Sway Bar Quick Disconnect
-Rear Heavy Duty Rear Sway Bar
-Heavy Front Tie Rods with 7/8" Himes
-Heavy Front and Rear Dif Covers
-Alloy USA front and rear Chrome Moly Axles
-G2 4.88 Ring and Pinions
-Tom Woods rear drive shaft

Wheels and Tires:
-17" Walker Evans REAL Bead Lock Wheels ($400 x 5)
-LT315/70R17 (basically 35's) Goodyear Wranglers with Kevlar ($400 x 5) all of the tires have less than 3000 on them!

-Full Custom 1 3/4" DOM tube Color Matched Roll Cage with 550 Cord Wrap (welded to the floorboards and integrated with the stock roll cage - SOLID)
-TerraFlex Hand Throttle
-Cobra CB Radio with PA Speaker
-10lb CO2 Bottle with Mount, Rubber Hose, and Tire Inflator with Gauge
-Hi-Lift 485 Jack with Base Plate and two sets of Mounts
-Smittybilt G.E.A.R. Tailgate Cover
-Full Recovery Kit

-Hansen Front Bumper with Rusty's Winch Mount
-Hansen Rear Bumper with Tire Carrier, Custom Dual Jerry Can Holder, and Shackle Receiver
-Warn XD9000i Winch with Daystar Hook Isolator (used only a handful of times)
-Bushwacker Flat Fender Flares with LED Turn Signals
-CB Antenna
-Smittybilt Metal Front Turn Signal Covers
-Rugged Ridge Quick Release Mirror Kit
-PIAA 4000k Headlights

-Padded Bag to Separate and Hold Soft Windows
-Custom Front Tow Bar
-All the Padding and Covers for the Stock Roll Cage
-Some other stock parts included

I'm sure there are some things that I am forgetting, but I think I included all of the important items.

The Jeep is located in Monterey, CA, and I am asking $25,000.


Lazy Slacker
10,453 Posts
That's a beautiful Jeep. Good luck with sale.

4 Posts
Discussion Starter #4
Thanks! She is a solid rig and a blast to drive...I would definitely keep her if I had time to do more than my 4 mile commute to work and back. She really needs home that will give her more fresh air.
1 - 6 of 6 Posts